Polyamide (PA6, PA66)PelletAsk about availability

Durethan BKV 30 H2.0

Grade: BKV 30 H2.0

Overview

Heat-stabilized 30% glass-filled PA6 for parts that sit at sustained elevated temperature rather than seeing a single thermal spike. The heat stabilization is the reason to pick it over a standard BKV 30.

Key advantages
  • Heat stabilized
  • Stiff
  • Good surface
Applications
Engine coversCooling system componentsUnder-hood housings

Technical datasheet

0% verified(0/96)

This grade's datasheet has not been ingested yet. The structure below is complete, and each value fills in as we transcribe the producer technical data sheet and our engineering team reviews it. Nothing here is invented to fill the gap.

Identification

Producer part number
BKV 30 H2.0
Nexeo material code
Awaiting datasheet
Resin family
Polyamide (PA6, PA66)
Abbreviation
Awaiting datasheet
Color
Awaiting datasheet
Grade status
Awaiting datasheet

Technical properties

Producer datasheetNexeo Applications Engineering assessmentUnreviewedExtracted, not yet checked by a personAwaiting datasheetNot published by producer
Mechanical properties for Durethan BKV 30 H2.0, with value, unit, test method and conditions
PropertyValueUnitTest methodConditions
Tensile ModulusAwaiting datasheetMPaISO 5271 mm/min
Tensile Modulus (dry)9600UnreviewedMPaISO 527Dry as moulded, 23 °C
Tensile Modulus (conditioned)5800UnreviewedMPaISO 527Conditioned to equilibrium, 23 °C / 50% RH
Tensile Stress at YieldAwaiting datasheetMPaISO 52750 mm/min
Tensile Stress at BreakAwaiting datasheetMPaISO 52750 mm/min
Tensile Strain at YieldAwaiting datasheet%ISO 52750 mm/min
Tensile Strain at BreakAwaiting datasheet%ISO 52750 mm/min
Flexural Modulus9000UnreviewedMPaISO 1782 mm/min
Flexural StrengthAwaiting datasheetMPaISO 1782 mm/min
Notched Izod Impact (23 °C)Awaiting datasheetkJ/m²ISO 180/1A23 °C
Notched Izod Impact (−30 °C)Awaiting datasheetkJ/m²ISO 180/1A−30 °C
Unnotched Izod ImpactAwaiting datasheetkJ/m²ISO 180/1U23 °C
Charpy Notched ImpactAwaiting datasheetkJ/m²ISO 179/1eA23 °C
HardnessAwaiting datasheet—ISO 868 / ASTM D2240—
Taber AbrasionAwaiting datasheetmg/1000 cycASTM D1044CS-10 wheel, 1 kg

0 of 15 mechanical properties verified against a producer datasheet.

Source: pending verification — awaiting LANXESS technical data sheet.

0% verified · 0 of 96 properties confirmed against a producer datasheet · 4 extracted and pending review.

Typical values for reference only — not a specification. Confirm against the current producer datasheet before designing to these numbers.

Chemical resistance

Producer datasheetNexeo Applications Engineering assessmentUnreviewedExtracted, not yet checked by a personAwaiting datasheetNot published by producer

Chemical compatibility for this grade has not been assessed yet. Ratings are added as our applications engineering team reviews each resin family.

Ratings describe the resin's general behaviour, not your part. Moulded-in stress, wall section, temperature and applied load all change the outcome — qualify the finished device with your own cleaning and exposure protocol.

Sterilization compatibility

Producer datasheetNexeo Applications Engineering assessmentUnreviewedExtracted, not yet checked by a personAwaiting datasheetNot published by producer
Sterilization method compatibility for Durethan BKV 30 H2.0
MethodCompatibleMax dose / cyclesProperty retentionDiscoloration
Gamma irradiationAwaiting assessmentConfirm with producerAwaiting assessmentAwaiting assessment
E-beamAwaiting assessmentConfirm with producerAwaiting assessmentAwaiting assessment
X-rayAwaiting assessmentConfirm with producerAwaiting assessmentAwaiting assessment
Ethylene oxideAwaiting assessmentConfirm with producerAwaiting assessmentAwaiting assessment
Steam autoclaveAwaiting assessmentConfirm with producerAwaiting assessmentAwaiting assessment
Vaporized hydrogen peroxideAwaiting assessmentConfirm with producerAwaiting assessmentAwaiting assessment
Dry heatAwaiting assessmentConfirm with producerAwaiting assessmentAwaiting assessment

Maximum dose and cycle counts require producer validation data, so we show "Confirm with producer" rather than a figure. Retention and discoloration notes are qualitative. Sterilization must always be validated on the finished device.

Regulatory & compliance

  • USP Class VIAwaiting confirmation
  • ISO 10993-1 (biological evaluation)Awaiting confirmation
  • ISO 10993-4 (blood interaction)Awaiting confirmation
  • ISO 10993-5 (cytotoxicity)Awaiting confirmation
  • ISO 10993-6 (implantation)Awaiting confirmation
  • ISO 10993-10 (irritation / sensitization)Awaiting confirmation
  • ISO 10993-11 (systemic toxicity)Awaiting confirmation
  • FDA Drug Master FileAwaiting confirmation
  • EU MDR statusAwaiting confirmation
  • Food contact statusAwaiting confirmation
  • REACH SVHCAwaiting confirmation
  • RoHSAwaiting confirmation
  • Animal-derived-free / TSE-BSEAwaiting confirmation
  • DEHP-freeAwaiting confirmation
  • Phthalate-freeAwaiting confirmation
  • BPA-freeAwaiting confirmation
  • Latex-freeAwaiting confirmation
  • California Prop 65Awaiting confirmation

Compliance status reflects producer statements and grade records on file. Always confirm the current position with a signed regulatory statement letter for your specific device and market before submission.

Documents

Documents marked “Request” are supplied on account. We link a download only when a real, current file is on file — never a placeholder that would 404.

Supply & logistics

Stocking, lead time and packaging for this grade are confirmed per order. Request a quote and the team responds with live availability rather than a figure that may be stale.

Processing & design notes

Primary process

Injection molding

Typically injection molded; verify drying requirements and melt temperature against the producer datasheet.

Structural role

Polyamide — engineered thermoplastic for device components.

Typically paired with

  • Complementary grades from the same resin family

Engineering watch-outs

  • Hygroscopic — dry to the producer-specified moisture level before molding to avoid hydrolytic degradation and splay.
  • No biocompatibility data is published for this grade — request documentation before any body-contact use.
  • Always qualify the specific lot and grade against your own device master record and validation plan.

Qualitative guidance only. We don't publish processing windows — confirm melt and mold temperatures, drying, and shrinkage against the producer technical data sheet and your own part qualification.

Supplier
LANXESS

Test Durethan BKV 30 H2.0 in your next build

Request a starter sample and our team will follow up with availability, documentation, and shipping details. No minimum order required for sampling.

Ask the AI copilot

Quote on request

Specialty grade — pricing varies by volume and lead time

Made to order

All orders are reviewed by our sourcing team. Final pricing, lead time, and documentation (CoA, SDS) are confirmed before fulfillment.

Related polyamide (pa6, pa66)